Brass Blind Rivets

Brass Blind Rivets

Brass Expansion Anchors

blind rivets

Material

  • Brass, CDA 360 Brass, Copper, Steel, Aluminium Body, Stainless Steel and Monel

Application

  • Blind rivets are mainly used when access to the joint is only available from one side.
  • Can be mounted blind.
  • For connecting thin-walled plates or for use with hollow profile structures.
  • The rivet is inserted into the nozzle of the processing tool by the mandrel and introduced into the hole by the rivet body.
  • When the tool is operated, the clamping jaws grip the mandrel and retract it.
  • Reduces labour and tooling costs, Reduces or eliminates drill bits and taps.
  • Used to fasten together two or more pieces of material of varying thickness.
  • Used in the application should equal or exceed the joint strength requirements.

Benefits

  • Unlike solid rivets, blind rivets can be inserted and fully installed in a joint from only one side of a part or structure, blind to the opposite side.
  • The rivet is placed in a pre-drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side.
  • They are available in various head styles with different standard diameters.

Operation

  • Available with a mandrel through the center.
  • Consist of a solid shaft with a head on one end; once installed, the headless end of a solid rivet is deformed with a hammer or rivet gun to hold it in place.
  • The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet.
  • This expands the blind end of the rivet and then the mandrel snaps off.
We can manufacture and export Brass Blind Rivets as per specifications (custom drawing and samples) for more information please Contact us